Warning -  Caution 

    Please Read this before charging any Battery

CHARGER VOLTAGE COMPATIBILITY:

    NEVER use a battery charger unless the battery voltage matches the output  voltage rating of the charger. 
    For example, do not use a 12-volt charger with a 6-volt battery and vice-versa.      

CHARGER LOCATION:

    LOCATE the charger as far away from the battery as is allowed by the length of the output cable harness.

    ALWAYS stay close to the charger and battery when charging, never leave battery unattended.

    NEVER set the charger above the battery.   

    NEVER set the charger and/or the battery on a surface constructed from combustible material.

    NEVER place the battery, the charger, or any of the electrical connections between them in an area that is
    likely to become wet.

EXCESSIVE MOISTURE:

    Do not expose the battery charger or any of its electrical connections (either AC or DC) to rain, snow, or
   extremely high, condensing humidity.     

CHARGER ATTACHMENTS:

   Do not use attachments that are not recommended or sold by the charger manufacturer. To do otherwise
   may result in the risk of electric shock, fire, or possibly some other unforeseen potential personal injury
   situations. 

MONITORING SEALED & NON-SEALED BATTERIES:

  When leaving a battery charger connected to either a sealed (AGM or GEL) or non-sealed
  (flooded battery) for extended periods of time (hours, weeks, months, etc.), Never leave a
  charging battery unattended, periodically check the battery to see if it is unusually warm.
  This is an indication that the battery may have a weak cell and that it could go into a thermal
  runaway condition. If the battery releases an excessive amount of gas or if the battery gets
  hotter than 130°F(55°C) during charging, disconnect the charger and allow the battery
  to cool. Overheating may result in plate distortion, internal shorting, drying out or other
  damage.